Flammability Testing Services

FLAMMABILITY TESTING EVALUATION OF COMPOSITES AND POLYMERS

IMR's flammability testing lab is designed to evaluate ignition susceptibility, and burning propagation of polymer materials.

IMR performs Vertical Burn Testing to ASTM D5132; FMVSS 302; ISO 3795; SAE J369; UL94 (except Section 10-radiant panel).

For more information on IMR's physical testing capabilities, click here to request a quote, or click the button below.

NM-FLAMMABILITY-450
Questions? Click Here

POLYMER CHARACTERIZATION SERVICES

Accelerated Aging (Heat, Fluids)
Bond Strength
Brookfield Rotational Viscosity
Coefficient of Expansion
Coefficient of Friction
Composite Testing
Compression Set
Compressive Properties (-240ºF to 660ºF)
Dynamic Mechanical Analysis (DMA)
Failure Analysis
Flammability (UL94, FMVSS 302, ISO 3795, SAE J369, ASTM D5132)
Fatigue Testing
Flexural Properties (-240ºF to 660ºF)
Gardner Impact
Glass Transition
Gloss (ASTM D523, D4039)
Hardness Testing (Barcol, Durometer/Shore)
Hazardous Substance Testing
Heat Deflection by TMA (E2092)
Impact Strength
Kinematic Viscosity
Lap Shear Testing
Melt Flow Rate/Index
Melting Point
Polymer Testing
SEM-EDS for Fillers
Taber Abrasion
Tear Resistance of Films & Sheeting
Tear of Rubbers & Elastomers
Tensile Properties (-240F to 660F)
UV Exposure

MECHANICAL TESTING

Bond Strength / Coating Adhesion
Charpy Impact Testing
Fatigue Testing
Flexural
Hardness
Tensile Testing
Weld Inspection

FAILURE ANALYSIS

Contaminant Identification
Corrosion Failure
Litigation/Expert Witness Services
Nonmetallic Failure Analysis
Structural Failures
Warranty Returns

RELEVANT ACCREDITATIONS

Click here for a complete list of accreditations and certifications for all IMR Test Labs locations.

Print Friendly, PDF & Email